Syma Forum
Welcome to our Syma Forum - Please click on topics to view comments.You have to be a member to post-Free to join. Enter correct email as password will be emailed to you- All Syma Helicopter help and advice here. NEW- you can now change color of forum, bottom of page!
A A APlease consider registering
guest
Now that is interesting and tells me you are a machine on this.please post more
"Fly like a butterfly sting like a Syma" http://syma107.com
I have cobbled together a magnetic prop balancer for my SYMA X1 rotor blades. I bought a Top Flight precision magnetic balancer and discovered that the balancer shaft was too large in diameter for the X1 rotor blades hub opening. I knew that a 1/16" drill bit works for a shaft so I started digging around in my RC junk yard for whatever parts I could use to make this unit work. I found that the old FM style antenna's end section was a little wider in diameter than 1/16" and would fit through the hub diameter opening of the X1 blades, and it was ferrous. I found that a SYMA S107G boom would slide over the antenna section and was not magnetic and that it would snug up inside the rotor blades recessed areas on both sides of the rotor hub.. Those Top Flight balancer cones actual fit very nicely over the tail boom. A little cutting and polishing and with some hypodermic needle rubber pistons for end stops I am good to go. End stops could be of any material.
Most Users Ever Online: 211
Currently Online:
10 Guest(s)
Currently Browsing this Page:
1 Guest(s)
Top Posters:
MikeK: 178
SymaGuru: 32
justdon: 9
nope: 5
smith: 2
groggy: 2
Member Stats:
Guest Posters: 729
Members: 20
Moderators: 0
Admins: 2
Forum Stats:
Groups: 7
Forums: 16
Topics: 1283
Posts: 8215
Newest Members:
Administrators: Syma Freak: 1452, JamDJ: 264